SAE 5W30 API CJ4/CI4/CH4 DIESEL ENGINE OIL is a fully synthetic, heavy duty diesel engine oil it combines advanced engine protection for modern less emissions vehicles with enhanced fuel economy potential and other sustainability related advantages such as engine strength, emissions system protection and extended drain capability.
SAE 5W30 utilizes state of the art technology to deliver exceptional performance and is well suited for an extensive array of diesel powered commercial vehicles for both on and off highway use in industries such as transportation, mining, construction and agriculture. SAE 5W30 meets range of industry and manufacturer specifications from all over the world.
E – Extra Protection to Engine, Clutch & Gears
V – Value for Money with 70% Extra Mileage
O – Outstanding Performance in all Weathers
ACEA E9 | X |
ACEA E7 | X |
ACEA E6 | X |
API CJ-4 | X |
API CI-4 PLUS | X |
API CI-4 | X |
API SN | X |
JASO DH-2 | X |
Caterpillar ECF-3 | X |
Cummins CES 20081 | X |
DAF Extended Drain | X |
Ford WSS-M2C171-E | X |
High output, low emissions engines significantly increase demands on engine lubricants. Tighter engine design minimizes oil utilization, resulting in less fresh oil makeup to restore depleted additives. Thermal stresses on the lubricant are increased with the use of inter coolers and turbochargers. Higher fuel injection and cylinder pressures and retarded timing improve burn efficiency, but also increase engine temperatures, volatility, and soot loading of the oil. The advanced technology in SAE 5W30 gives exceptional performance in these conditions while protecting emissions systems.
Features | Advantages |
---|---|
Advanced Wear Protection | Engine Durability |
Enhanced Fuel Economy Potential | Decrease Fuel utilization |
Extended Drain Interval Capability | Fewer Oil Changes and Less Oil Disposal |
Emissions System Protection | Emissions System Durability and Performance |
Good Low Temperature Performance | Easier Starting in Cold Weather |
SAE Grade | 5W30 |
---|---|
Viscosity, ASTM D 445 | |
cSt @ 40ºC | 69 |
cSt @ 100ºC | 11.8 |
Viscosity Index, ASTM D 2270 | 168 |
Sulfated Ash, wt%, ASTM D 874 | 1.0 |
Total Base #, mg KOH/g, ASTM D 2896 | 10 |
Pour Point, ºC, ASTM D 97 | -51 |
Flash Point, ºC, ASTM D 92 | 224 |
Density @ 15ºC kg/l, ASTM D 4052 | 0.855 |
Lubricants consisting of highly refined mineral oils with specification additives. In normal conditions of use, this lubricant presents no particular toxic hazard. All lubricants, of any kind should be handled with great care, particularly avoiding can contact with the skin.
Prevent any splashing, and keep away from combustible materials. Store under cover and away from any risk of pollution. Dispose off the used oil correctly; don’t pour down drains, into watercourses or the soil.